Micropatterning of DNA-tagged vesicles

We present a novel concept for the creation of lipid vesicle microarrays based on a patterning approach termed Molecular Assembly Patterning by Lift-off (MAPL). A homogeneous MAPL-based single-stranded DNA microarray was converted into a vesicle array by the use of vesicles tagged with complementary DNAs, permitting sequence-specific coupling of vesicles to predefined surface regions through complementary DNA hybridization. In the multistep process utilized to fulfill this achievement, active spots consisting of PLL-g-PEGbiotin with a resistant PLL-g-PEG background, as provided by the MAPL process, was converted into a DNA array by addition of complexes of biotin-terminated DNA and NeutrAvidin. This was then followed by addition of POPC vesicles tagged with complementary cholesterol-terminated DNA, thus providing specific coupling of vesicles to the surface through complementary DNA hybridization. Quartz crystal microbalance with dissipation (QCM-D) and optical waveguide lightmode spectroscopy monitoring were used to optimize the multistep surface modification process. It was found that the amount of adsorbed biotinDNA-NeutrAvidin complexes decreases with increasing molar ratio of biotinDNA to NeutrAvidin and decreasing ionic strength of the buffer solution. Modeling of the QCM-D data showed that the shape of the immobilized vesicles depends on the amount of available anchoring groups between the vesicles and the surface. Fluorescent microscopy images confirmed the possibility to create well-defined patterns of DNA-tagged, fluorescently labeled vesicles in the micrometer range.     

Generation of C6H4+* by laser vaporization of magnesium with o-C6H4F2 in argon carrier gas

A route to efficient generation of C6H4+*, potentially the benzyne radical cation, is presented. Laser vaporization of Mg+* and supersonic expansion in helium doped with o-, m-, or p-C6H4F2 yields, among other ions, o-, m-, p-C6H4F2Mg+* complexes, but no C6H4+*. Collision-induced dissociation experiments show that the o-C6H4F2Mg+* complex can be converted into C6H4+* in a mildly energetic collision, with a center-of-mass energy around 1-2 eV. These conditions can also be reached in the ion source when argon is used as a carrier gas. In this way, mass spectra containing the desired m/z 76 peak, i.e. C6H4+*, are obtained.     

Etude des copolymeres (ethylene-hexene-1) par resonance magnetique nucleaire du proton et du carbone 13

Ethylene 1-hexene copolymers obtained by catalytic polymerization have been examined by ¹H and ¹³C NMR. Copolymer compositions have been determined by ¹H NMR and i.r. and the sequence distributions for 1-hexene by ¹³C NMR. Variations of the copolymer microstructure have been related to the experimental conditions for copolymerization.     

Determination of hexacyanoferrate based on its catalytic influence on the oxidation of p-phenylenediamines by iron(III)

Summary Both hexacyanoferrate(III) and hexacyanoferrate(II) catalyze the oxidation of p-phenylenediamines by iron(III)_aq. The rate of this reaction in the presence of a sample with an unknown amount of hexacyanoferrate is compared with the reaction rate of solutions containing well defined concentrations of this substance. In this way, hexacyanoferrate can be determined photometrically down to <10^–9 mol/l. Although this procedure is very sensitive, the analysis can be performed with a simple photometer. Absorbance changes >0.2 can easily be obtained in 1 cm cuvettes, even at extremely small concentrations of hexacyanoferrate, because it is not an absorbance proportional to the concentration of hexacyanoferrate but rather the formation rate of p-semiquinonediimine which enables the quantitative determination of hexacyanoferrate.     

Modulating the light switch by (3)MLCT-(3)ππ* state interconversion

The spectroscopic, electronic, and DNA-binding characteristics of two novel ruthenium complexes based on the dialkynyl ligands 2,3-bis(phenylethynyl)-1,4,8,9-tetraaza-triphenylene (bptt, 1) and 2,3-bis(4-tert-butyl-phenylethynyl)-1,4,8,9-tetraaza-triphenylene (tbptt, 2) have been investigated. Electronic structure calculations of bptt reveal that the frontier molecular orbitals are localized on the pyrazine-dialkynyl portion of the free ligand, a property that is reflected in a red shift of the lowest energy electronic transition (1: λ(max) = 393 nm) upon substitution at the terminal phenyl groups (2: λ(max) = 398 nm). Upon coordination to ruthenium, the low-energy ligand-centered transitions of 1 and 2 are retained, and metal-to-ligand charge transfer transitions (MLCT) centered at λ(max) = 450 nm are observed for [Ru(phen)(2)bptt](2+)(3) and [Ru(phen)(2)tbptt](2+)(4). The photophysical characteristics of 3 and 4 in ethanol closely parallel those observed for [Ru(bpy)(3)](2+) and [Ru(phen)(3)](2+), indicating that the MLCT excited state is primarily localized within the [Ru(phen)(3)](2+) manifold of 3 and 4, and is only sparingly affected by the extended conjugation of the bptt framework. In an aqueous environment, 3 and 4 possess notably small luminescence quantum yields (3: ?(H(2)O) = 0.005, 4: ?(H(2)O) = 0.011) and biexponential decay kinetics (3: τ(1) = 40 ns, τ(2) = 230 ns; 4: τ(1) ～ 26 ns, τ(2) = 150 ns). Addition of CT-DNA to an aqueous solution of 3 causes a significant increase in the luminescence quantum yield (?(DNA) = 0.045), while the quantum yield of 4 is relatively unaffected (?(DNA) = 0.013). The differential behavior demonstrates that tert-butyl substitution on the terminal phenyl groups inhibits the ability of 4 to intercalate with DNA. Such changes in intrinsic luminescence demonstrate that 3 binds to DNA via intercalation (K(b) = 3.3 × 10(4) M(-1)). The origin of this light switch behavior involves two competing (3)MLCT states similar to that of the extensively studied light switch molecule [Ru(phen)(2)dppz](2+). The solvent- and temperature-dependence of the luminescence of 3 reveal that the extended ligand aromaticity lowers the energy of the (3)ππ* excited state into competition with the emitting (3)MLCT state. Interconversion between these two states plays a significant role in the observed photophysics and is responsible for the dual emission in aqueous environments.     

Ferrocenderivate LX. Rationelle synthesen der ferrocen-1,1′-dicarbonsäure sowie von isomeren methyl-, phenyl-ferrocen- und [3]ferrocenophan-mono- und -1,1′-di-carbonsäuren

Mono- or 1,1′-bis-acylation of ferrocene, its mono and 1,1′-dimethyl and phenyl derivatives and of [3]ferrocenophane with o-chlorobenzoyl chloride/AlCl₃ affords the corresponding (isomeric) chlorobenzoyl ferrocenes in high yields which can be separated by column, layer or high pressure liquid chromatography and in the case of the monomethylferrocene monoketones also by crystallization. The cleavage of the (o-chlorobenzoyl)ferrocenes by potassium-t-butoxide (and traces of water) yields the corresponding ferrocene carboxylic acids except for the α-phenyl derivatives in almost quantitative yields, thus offering a very convenient access to these acids. In all cases the isomer distribution and thereby the relative site reactivities were determined.     

Jod-spezifischer Detektor für einen Gas-Chromatographen

The In-flame detector earlier applied to the specific chlorine (359.9 nm) and bromine (372.7 nm) analysis has now been employed for the iodine determination at 409.9 nm. It is shown that the resolution power of a GC column can be improved by such a specific detector. After calibration quantitative measurements of the iodine contents of the GC fractions are possible. The detection limits are 0.01–1.4 μg of iodine.     

Oligosaccharide-modified poly(propyleneimine) dendrimers: synthesis, structure determination, and Cu(II) complexation

The multiple application of reductive amination on primary amino groups of first and second generation poly(propyleneimine) dendrimers is used as a one-pot approach to introduce twice the amount of the oligosaccharide units as surface groups, compared to initially present amino groups in the first and second generation dendrimers. This was proven by (1)H NMR, MALDI-TOF-MS, and LILBID-MS analysis. The size of these dendrimers was determined by the hydrodynamic radius using pulsed field gradient NMR and dynamic light scattering. Molecular modeling confirmed the presence of dense-shell dendrimers. These dendrimers exhibit a generation dependent Cu(II)/dendrimer ratio in an aqueous environment, highlighting these materials as possible metal-carrier systems with a well-defined oligosaccharide protection shell for application in a biological environment.     

A chip-based platform for the in vitro generation of tissues in three-dimensional organization

We describe a multi-purpose platform for the three-dimensional cultivation of tissues. The device is composed of polymer chips featuring a microstructured area of 1-2 cm(2). The chip is constructed either as a grid of micro-containers measuring 120-300 x 300 x 300 microm (h x l x w), or as an array of round recesses (300 microm diameter, 300 microm deep). The micro-containers may be separately equipped with addressable 3D-micro-electrodes, which allow for electrical stimulation of excitable cells and on-site measurements of electrochemically accessible parameters. The system is applicable for the cultivation of high cell densities of up to 8 x 10(6) cells and, because of the rectangular grid layout, allows the automated microscopical analysis of cultivated cells. More than 1000 micro-containers enable the parallel analysis of different parameters under superfusion/perfusion conditions. Using different polymer chips in combination with various types of bioreactors we demonstrated the principal suitability of the chip-based bioreactor for tissue culture applications. Primary and established cell lines have been successfully cultivated and analysed for functional properties. When cells were cultured in non-perfused chips, over time a considerable degree of apoptosis could be observed indicating the need for an active perfusion. The system presented here has also been applied for the differentiation analysis of pluripotent embryonic stem cells and may be suitable for the analysis of the stem cell niche.     

4H-Chromenone Glycosides from Eranthis hyemalis (L.) SALISBURY

Investigation of the tubers of Eranthis hyemalis (Ranunculaceae) afforded six chromenone glycosides. Their structures have been elucidated mainly by spectroscopic (FAB-MS, 2D-NMR techniques) and chemical methods (acidic and enzymatic hydrolysis) as 9-{[(β-D -glucopyranosyl)oxy]methyl}-8,11-dihydro-5-hydroxy-2-methyl-4H-pyrano[2,3-g][1]benzoxepin-4-one ( 1 ), 9-{[(β-D -gentiobiosyl)oxy]methyl}-8,11-dihydro-5-hydroxy-2-methyl-4H-pyrano[2,3-g][1]benzoxepin-4-one( 2 ), 9-{[(β-D -glucopyranosvl)oxy]melhyl}-8,11-dihydro-5-hydroxy-2-(hydroxy-methyl)-4H-pyrano[2,3-g][1]benzoxepin-4-one( 3 ), 8-{(2E)-4-[(β-D -glucopyranosyl)oxy]-3-methylbut-2-enyl}-5,7-dihydroxy-2-methyl-4H-1-benzopyran-4-one ( 4 ), 8-{(2E)-4-[(β-D -glucopyranosyi)oxy]-3-methylbut-2-enyl}-5,7-dihydroxy-2-(hydroxymethyl)-4H-1-benzopyran-4-one ( 5 ), and 7-{[(β-D -glucopyranosy1)oxy]methyl}-2,3-dihydro-2-(l-hydroxy-1-methylethyl)-4-methoxy-5H-furo[3,2-g][1]benzopyran-5-one ( 6 ). Compound 2 exhibited negative inotropic activity.